Canned food manufacturing

Fully automatic food-can production line. Includes an automatic duplex slitter, can-body seamer, internal and external coating with a high-frequency induction oven, and a can-body forming machine. Leak tester. Used to manufacture sardine cans and tomato-paste cans at speeds ranging from 200 to 400 cpm.

MESSAGE

CONTACT

Product Details

Fully automatic food-can production line. Includes an automatic duplex slitter, can-body seamer, internal and external coating with a high-frequency induction oven, and a can-body forming machine. Also features a leak tester. Used to manufacture tomato-paste and sardine cans at speeds ranging from 200 to 400 cans per minute.

1. Automatic duplex cutter
For can-manufacturing companies, produce the blanks for the can body.
With Mitsubishi electrical control components. YUKEN hydraulic components.
The first cutting knives are made of carbide alloy.

	Model	GT10CA
	Maximum feed size	1200x1200mm
	Minimum feed size	600x600mm
	Cutting thickness	0.12-0.5mm
	Cutting speed:	32SPM
	Diagonal tolerance	≤0.05 mm
	Max. Qty. 1 Cut	6strips
	Max. Qty. 2nd Cut	12 strips (75–1200 mm)
	Power	12KW

2. Automatic seam welder

	Model	FHZ-300
	Production capacity	200-300 cpm
	Can diameter	52-99mm
	Can height	39-120mm
	Line speed	30-50m/min
	Welding frequency	300-700Hz
	Copper wire	1.27-1.38mm
	Raw materials	Galvanized sheet

3. Rear-feed seam welding machine

	Model:	LS-B5
	Cooling capacity:	8500/33745KCAL/BTV
	Pump power:	0.375Kw
	Voltage:	380V/50Hz
	Compressed air power:	2.25Kw
	Tank capacity:	55LT
	Net weight:	160kgs
	Dimensions:	1000x700x1050mm

4. Internal and external coating machine
This machine uses a suspended conveyor system, which is better suited for powder coating.

	Model:	GNWT-420
	Can diameter	52-105mm
	Coating method:	Spraying method
	Coating width:	10-15mm
	Dimensions	1350x800x1800mm
	Weight	450kgs

5. Induction furnace machine
This machine is used to dry the can body after painting using high-frequency induction.

	Drying capacity:	12-57m/min
	Model	GTCHG-180
	Drying method:	High-frequency induction winding system
	Dryer size:	10660x1410x1800mm
	Maximum power consumption	18kwh
	Weight	3000kg

6. Internal powder coating machine
This machine uses a Japanese SMC valve, a Mitsubishi PLC, and a frequency inverter.

	Model	CTPC-2
	Transport speed	5-60m/min
	Coating width	10-20mm
	Can diameter	52-280mm
	Type of powder	Polyester
	Air compressor	0.4 MPa, 0.5 m³/min
	Engine power	AC 220 V, 50 Hz, 2.8 kW

7. Body flange riveting sewing machine
Vertical design, easy to connect with other machines. Recyclable central lubrication system.
Multi-safety design for machine and personnel safety.
Flanging rolls are driven by tiny gears, respectively. Carbide material for machine and personnel safety.
Chrome-plated guide bushing and sprocket.