Manufacture of rectangular cans

Layout of the 1–4 L automatic rectangular can manufacturing machine: 1. Duplex automatic slitter Model: GT10A Sheet thickness: 0.12–0.5 mm Maximum sheet width: 1200 × 1200 mm Minimum sheet width: 600 × 600 mm

MESSAGE

CONTACT

Product Details

Layout of the 1–4 L Automatic Rectangular Can Manufacturing Machine

1. Automatic double-sided splitter

	Model:	GT10A
	Plate thickness:	0.12–0.5 mm
	Maximum sheet width:	1200 * 1200 mm
	Minimum plate width:	600 * 600 mm
	Size error:	± 0.02 mm
	Error on the diagonal:	± 0.05 mm
	Engine power:	8 kw
	Dimension:	4000 x 7000 x 1200 mm

2. Automatic roll and seam welding machine

	Model:	FH18-65ZD
	Capacity:	40–60 cans/min
	Can diameter:	65–180 mm
	Can height:	70-280 mm
	Applicable material thickness:	0.18–0.32 mm
	Applicable copper wire diameter:	1.38–1.5 mm
	Cooling water: T: ≤ 20 °C P: 0.4 MPa Flow rate: 7 L/min
	Power:	380 V ± 5% 50 Hz 18 kVA
	Dimension:	1750 x 1100 x 1800 mm
	Net weight:	1900kg

3. Internal and external coating machine

	Model:	GNWT-180S
	Capacity:	5–30 m/min
	Can diameter:	Φ52–Φ180 mm
	Coating width:	8–15 mm
	Coating type:	Roll coating
	Air supply and consumption:	0.6 MPa 20 L/min
	Power:	220V
	Dimension:	2100 * 720 * 1520 mm

4. Induction furnace

	Model:	GDCHG-180-6
	Drying method:	Electrical induction drying
	Work area:	6 * 800 mm
	Can diameter:	Φ52–Φ180 mm
	Treadmill speed:	5–30 m/min
	Weight:	850kg
	Dimension:	3800 * 700 * 1420 mm

5. Automatic rectangular can body machine

	Model:	GTYX-S
	Applicable can:	1–4 L square can
	Capacity:	25–30 cans/min
	Applicable can height:	100–330 mm
	Dimension:	18 m (L) * 2 m (W) * 3 m (H)
	Voltage:	3-phase, 4-wire, 380 V
	Air pressure:	Not less than 0.6 MPa
	Power of the entire line:	40KW

6. Automatic leak testing machine for 1–4 L square cans

	Note:	Eight-head precision leak testing device
	Capacity:	1,500–1,800 units/hour
	Applicable:	1–4 L square can
	Accuracy:	0.12–0.15 mm
	Air source pressure:	0.5 MPa 500 kPa
	Air test pressure:	< 20 kPa
	Dimension:	2360 * 1670 * 2205 mm